Справочник Пользователя для Intel PX865PE7
![Intel](https://files.manualsbrain.com/attachments/5a71b1e7f60391972dadeef20435931cbf4621a5/common/fit/150/50/86c99b5f14aeb2708e9a9e1b5305af4ccf882c1af0155dad25413c2ed84e/brand_logo.png)
PX865PE7 PRO/ PX865PE7
30
IDE Primary / Secondary /Master / Slave UDMA
Ultra DMA 100 functionality can be implemented if it is supported by the IDE hard drives in your
stem. As well, your operating environment requires a DMA driver (Windows 95 OSR2 or a third
IDE bus master driver). If your hard drive and your system software both support Ultra DMA
00, select “Auto” to enable BIOS support. Options: Auto (default)、Disabled
**OnChip Serial ATA Setting***
n-Chip Serial ATA
his item allows you to enable or disabled the on-chip serial ATA function.
ptions:
isabled
Disable on-chip serial ATA. No Serial ATA devices installed.
uto(default) BIOS will auto-detect the presence of any SATA devices. When attach
4 (or 3) IDE drivers + 2 (or 1) SATA drivers Æ Enhanced Mode
2 (or 1) IDE drivers + 2 (or 1) SATA drivers Æ Combined Mode
2
(or
1)SATA
drivers
Æ SATA only
4 (or3, or 2, or 1) IDE drivers Æ Disabled
ombined Mode
Windows
®
98/ME can recognize IDE devices but cannot directly recognize
A device and therefore you must use this mode to allow the SATA
nnel can support 2 IDE drives). If you
ll all 4 IDE drives and both SATA drives, you will only see 2 of
rives along with the 2 IDE drives in this mode.
de, you can use all 6 hard disk drives (including 4 IDE drives and
you install SATA drives only.
d Device” label and then press the enter key, it will take you to a
sy
party
1
party
1
*
O
T
O
D
A
C
an SAT
device to simulate an IDE device by assuming the role of one IDE channel
in the system. This means that you will have one available IDE channel for
2 SATA drives to use (each IDE cha
were to insta
device to simulate an IDE device by assuming the role of one IDE channel
in the system. This means that you will have one available IDE channel for
2 SATA drives to use (each IDE cha
were to insta
d
the SATA
Enhanced Mode In this mo
2 SATA drives). Note: You cannot use “Enhanced” mode with Windows
®
98/ME. It only support to install Windows
®
2000/ XP if you want to boot
from SATA device. (It’s restriction from Microsoft.)
SATA Only
Select this option when
Serial ATA Port0/ 1 Mode
This item allows you to select the Serial ATA device mode for port 0 & 1 .
Onboard Device
If you highlight the “Onboar
submenu with the following options:
submenu with the following options:
USB Controller
This option should be enabled if your system has a USB port installed on the system board. You will
need to disable this feature if you add a higher performance controller.
need to disable this feature if you add a higher performance controller.
Options: Enabled (default)、Disabled