Справочник Пользователя для Intel PX865PE7

 
 

 

 

 

35 

 

ters a “hung” state, you can configure the BIOS so that you are 

e power button for more than 4 seconds before the system enters the Soft-Off state. 

Control” label and then press the enter key, it will display a submenu 

 

call to modem device. 

 

ode using a USB keyboard. 

t to S3. 

de. Options: Enabled、Disabled (default). 

 only configurable 

 configurable 

to “Enabled”. 

ave any activity, the system will awaken. You can select the 

end/power-on activity by configuring these fields. Devices include: 

d 

In situations where the system en
required to pre th

Options: Delay 4 Sec, Instant-Off (default). 

 

e Up 

If you highlight the “Wak
with the following options: 

 

This option will also cause the system to wake up with any onboard LAN activity.

Options: Disabled (default)、Enabled 

 

This option allows you to awaken the system upon receiving an incoming 
Options: Disabled (default)、Enabled. 

This item allows you to awaken the system from suspend m

Options: Enabled、Disabled (default) 

* This option is configurable only when the ACPI Suspend Type is se

 

When “Enabled”, you can set the date and time at which the RTC (real-time clock) alarm awakens 
the system from Suspend mo

 

You can choose which date of the month the system will boot up. This field is
when “RTC Wake Up” is set to “Enabled”. 

 

You can choose the hour, minute and second the system will boot up. This field is only
when “RTC Wake Up” is set 

 

When a system goes into suspend mode, certain devices must be inactive for a period of time. 
Conversely, if any of those devices h
devices that will participate in susp
Primary IDE 0/ Primary IDE 1/ Secondary IDE 0/ Secondary IDE 1/ FDD,COM,LPT Port/ PCI PIRQ 
[A-D]#. Options: Disabled (default), Enable