Справочник Пользователя для Citrix Systems 6
143
Parameter Name
Description
Type
other-config:ethtool-gso
set to
on
to enable generic segmentation
offload,
off
to disable
read write
other-config:domain
comma-separated list used to set the DNS
search path
search path
read write
other-config:bond-
miimon
miimon
interval between link liveness checks, in
milliseconds
milliseconds
read write
other-config:bond-
downdelay
downdelay
number of milliseconds to wait after link is
lost before really considering the link to have
gone. This allows for transient link loss
lost before really considering the link to have
gone. This allows for transient link loss
read write
other-config:bond-
updelay
updelay
number of milliseconds to wait after the
link comes up before really considering it
up. Allows for links flapping up. Default is
31s to allow for time for switches to begin
forwarding traffic.
link comes up before really considering it
up. Allows for links flapping up. Default is
31s to allow for time for switches to begin
forwarding traffic.
read write
disallow-unplug
True if this PIF is a dedicated storage NIC,
false otherwise
false otherwise
read/write
Note:
Changes made to the
other-config
fields of a PIF will only take effect after a reboot.
Alternately, use the xe pif-unplug and xe pif-plug commands to cause the PIF configuration
to be rewritten.
to be rewritten.
pif-forget
pif-forget
uuid=
<uuid_of_pif>
Destroy the specified PIF object on a particular host.
pif-introduce
pif-introduce
host-uuid=
<UUID of XenServer host>
mac=
<mac_address_for_pif>
device=
<machine-
readable name of the interface (for example, eth0)>
Create a new PIF object representing a physical interface on the specified XenServer host.
pif-plug
pif-plug
uuid=
<uuid_of_pif>
Attempt to bring up the specified physical interface.
pif-reconfigure-ip
pif-reconfigure-ip
uuid=
<uuid_of_pif>
[ mode=
<dhcp>
| mode=
<static>
]
gateway=
<network_gateway_address>
IP=
<static_ip_for_this_pif>
netmask=
<netmask_for_this_pif>
[DNS=
<dns_address>
]
Modify the IP address of the PIF. For static IP configuration, set the
mode
parameter to
static
, with the
gateway
,
IP
, and
netmask
parameters set to the appropriate values. To use DHCP, set the
mode
parameter
to
DHCP
and leave the static parameters undefined.
Note: