Справочник Пользователя для Liebert Power Strips

L

IEBERT

 MP™ A

DVANCED

 P

OWER

 S

TRIPS

Q

UICK

-S

TART

 G

UIDE

: O

PEN

C

OMMS

EM 

OR

 MP A

DVANCED

 A

CCESS

 S

ERVER

This manual contains important safety instructions. Read all safety, installation and operating 

instructions before installing the Liebert MP Advanced Power Strip or Access Server. Adhere to all 

warnings on the unit and in this manual. Follow all operating and user instructions. Individuals 

without previous training can install and operate this equipment. 
The Liebert MP Advanced Power Strip and Access Server are not intended for use with life support or 

other designated critical devices. Maximum load must not exceed that shown on the Liebert MP 

Advanced Power Strip or Access Server rating label. The Liebert MP Advanced Power Strip and 

Access Server are designed for data processing equipment. If uncertain, consult your local dealer or 

Liebert representative.

Operate the Liebert MP Advanced Power Strip and Access Server in an indoor environment only in an 

ambient temperature range of 32°F to +104°F (0°C to +40°C). Install it in a clean environment, free 

from conductive contaminants, moisture, flammable liquids, gases and corrosive substances.

Never block or insert any object into the Liebert MP Advanced Power Strip or Access Server.
DO NOT CONNECT equipment that could overload the Liebert MP Advanced Power Strip or Access 

Server.
Refer to the Liebert MP Advanced Power Strip and Access Server user manual, SL-20815, to deter-

mine the electrical ratings and specifications of your Liebert MP Advanced Power Strip or Access 

Server. It is imperative that the power supply and connections match the specifications of the power 

strip or access server being installed.

Opening or removing the cover of MP Advanced Power Strips or Access Servers may expose 

you to lethal voltages within the unit.
Observe all cautions and warnings in this manual. Failure to do so may result in serious 

injury or death. Do not attempt to service this product yourself. Refer all service to qualified 

service personnel. Never work alone.

The Liebert MP Advanced Power Strip and Access Server contain no user serviceable parts. 

Under no circumstances attempt to gain internal access due to risk of electric shock or burn. 

Do not continue to use the Liebert MP Advanced Power Strip or Access Server if the LED 

panel or monitoring interface indicators are not in accordance with these operating 

instructions. Refer all faults to your local dealer or Liebert representative.

Connecting your Liebert MP Advanced Power Strip, Access Server or rack equipment to a 

power supply with an incorrect rating in either voltage, amperes or phase may damage the 

connected equipment and your Liebert MP Advanced Power Strip or Access Server.
If you have questions about the power supply connections, contact your local Liebert 

representative or Liebert Technical Support at 1-800-222-5877.

Shut down and unplug all equipment in your rack enclosure before beginning to connect the 

equipment to your Liebert MP Advanced Power Strip or Access Server.