Справочник Пользователя для Fujitsu M3097E+
5 – 10
5.6
Replacing the pad
(1) Pull up the ADF open and close lever to open the ADF.
(2) Remove the four screws shown in Figure 5.8 to remove the two
(2) Remove the four screws shown in Figure 5.8 to remove the two
pads.
(3) Install the pad by reversing the removal procedure.
Figure 5.8
Removing the pad
NOTICE
Attach the pad so that the corner cut is top left. Attach the pad so
that the edges do not go under the pick spring 2 or over guide C.
that the edges do not go under the pick spring 2 or over guide C.