Справочник Пользователя для Kodak 6J7611A

3-6

A-61500  May 2010

To raise the front of the output tray:

1. Lift the front of the output tray.

2. Swing the height adjustment wire out from underneath the output 

tray and insert it into the groove on the printer access cover.

3. When finished using the output tray in this position, tuck the height 

adjustment wire back into position and lower the output tray.

To adjust the output tray to accommodate long documents from

 

37 cm 

14.5 in.) to 43 cm (17 in.):

1. Lift the front of the output tray and pull it out of the detent position.

2. Place the output tray in the forward detent position.

3. Gently push down on the left side of the output tray until in snaps 

into place. 

4. Adjust the output tray end stop to accommodate long (or short) 

documents by pulling the end stop forward (or backward).

5. Remove the exit deflector.

Forward detent positions