Справочник Пользователя для Kodak 6J7611A

A-61500 May 2010

5-1

This chapter provides:

• a cleaning frequency chart

• a list of cleaning tools and materials

• a list of supplies and accessories

• cleaning procedures for the scanner
• replacement procedures for parts that are customer-replaceable

Cleaning your scanner and preventative maintenance on a regular 
basis is required to ensure the best possible image quality. The 
following is a preventative maintenance procedure that is 
recommended to prevent costly interruptions during production 
scanning. Following this procedure as recommended should take 
approximately 5 to 10 minutes.

Some document types generate more paper dust and debris and may 
require more frequent cleaning than recommended. 

NOTES:

• Follow the recommended Kodak cleaning procedures. Do not use air, 

liquid or gas spray cleaners. These cleaners only displace the dust, 
dirt or debris to another location within the scanner, which could 
cause the scanner to malfunction.

• Some debris from the rubber tires on the feed module and separation 

roller is normal. Tire debris does not always mean that the tires are 
worn or damaged. After cleaning, inspect the tires for wear and 
replace the separation roller or feed module if necessary.

• When cleaning rollers/tires, allow the rollers/tires to dry completely 

before scanning.

• Use only approved cleaning materials as specified in this manual.