Справочник Пользователя для Kodak 6J7611A

5-12

A-61500  May 2010 

This section provides procedures for replacing the following parts. Use 
the list below as a guideline for frequency of replacement.

• Feed Module tires and Separation Roller tires — tire life will vary 

depending upon paper types, environment and cleanliness. Nominal 
tire life will be approximately 500,000 documents; results will vary. 
Degradation of feeder performance, multiple feeds, stoppages, etc. 
indicate a need to change tires. Change all the tires on the feed 
module and separation roller at the same time.

• Feed Module and Separation Roller — it is recommended that you 

install a new feed module and separation roller approximately every 
4th tire change. Install a new feed module and separation roller at the 
same time.

• Pre-separation Pad — it is recommended that you change the pre-

separation pad approximately every 500,000 documents.

• Imaging Guides — replace when the imaging guides are heavily 

scratched and defects show in the image.

To replace the feed module or feed module tires:

1. Remove the output tray.

2. Lift up the printer access cover. 

3. Open the pod.