Справочник Пользователя для Kodak 6J7611A

5-16

A-61500  May 2010 

1. Open the pod.

2. Pull the separation pad holder forward and remove the separation 

roller.

If you want to replace the separation roller, do Steps 3 and 4. If you 
want to replace the separation roller tires, go to Step 5.

3. Insert the new separation roller. Be sure to line up the slots on the 

separation roller with the holders.

4. Push the separation roller holder back in place and close the pod.

To replace the tires:

5. Replace each tire by sliding the tire off the core.

6. Install each new tire by gently pulling it over the core.

7. Reinstall the separation roller. Be sure to line up the slots on the 

separation roller with the holders.

8. Push the separation roller holder back in place and close the pod.