Справочник Пользователя для Honeywell 3800gPDF

1 - 6

For most laptops, scanning the Laptop Direct Connect bar code allows opera-
tion of the imager in parallel with the integral keyboard.  The following Laptop 
Direct Connect bar code selects terminal ID 03, programs a carriage return 
(CR) suffix and turns on Emulate External Keyboard (

1. Turn off power to the terminal/computer.

2. Connect the appropriate interface cable to the imager.

Note: For the imager to work properly, you must have the correct cable for your 

type of terminal/computer.

3. Plug the serial connector into the serial port on your computer.  Tighten the 

two screws to secure the connector to the port.

4. Connect the power supply and plug into an outlet.

5. Turn the terminal/computer power back on.

Note: You will not hear a power-up beep because the 3800g is factory defaulted 

below to enable RS-232 ability.

Laptop Direct Connect

with CR suffix