Справочник Пользователя для Motorola MS4407
7 - 2
Symbol MS4404/MS4407 Integration Guide
Imaging Sequence Examples
In most cases capturing one bar code sets the parameter value. For example, to disable the decode aiming
pattern, capture the Disable Decode Aiming Pattern bar code listed under
pattern, capture the Disable Decode Aiming Pattern bar code listed under
For systems that use a beeper and LED, a fast warble beep sounds and the LED lights, signifying a successful
parameter entry.
parameter entry.
Other parameters, such as Crop to Pixel Address, require capturing several bar codes. See these parameter
descriptions for this procedure.
descriptions for this procedure.
Errors While Imaging
Unless otherwise specified, to correct an error during an imaging sequence, just re-capture the correct parameter.
Imager Preferences Parameter Defaults
lists defaults for imager preferences parameters. To change any option, capture the appropriate bar
.
NOTE
See
for all user preferences, hosts, symbologies, and miscellaneous
default parameters.
Table 7-1
Imager Preferences Default Table
Parameter
Parameter Number
Default
Page Number
Imaging Options
Focus Mode
F0h A6h
Far Focus
Note: The default value
for DPM digital scanners
is Near Focus.
Note: The default value
for DPM digital scanners
is Near Focus.
Decoding Autoexposure
F0h 29h
Enable
Decoding Illumination
F0h 2Ah
Enable
Decode Aiming Pattern
F0h 32h
Enable
DPM Scanning
F1h 09h
Enable
Image Capture Autoexposure
F0h 68h
Enable
Image Capture Illumination
F0h 69h
Enable
Gain
F4h F0h A7h
100
Exposure Time
F4h F0h 38h
10 ms
LED Illumination
F0h ADh
External LED Illumination
Snapshot Mode Timeout
F0h 43h
0 (30 seconds)