Справочник Пользователя для ABL electronic Scamax 5000
DpuScan
Scamax 2600 / 5000
Scanner Options
If the counters are correspondingly set and enabled in the module Patchcode-Controlled Index, they
will be set and incremented as per the defined rules. So, for example, a document with the Patchcode
”Patch I” can indicate a new chapter. The chapter counter value increases incrementally by one and
the sheet counter is reset to zero.
will be set and incremented as per the defined rules. So, for example, a document with the Patchcode
”Patch I” can indicate a new chapter. The chapter counter value increases incrementally by one and
the sheet counter is reset to zero.
The Index Flags
There are two flags that can be set for a sheet:
The latched flag remains set until it is reset, manually or via a defined Rule.
It can, for example, indicate that certain sheets are addenda to a certain form.
The momentary flag is valid only for the next sheet; it is then automatically reset.
You can use it, for example, to mark only the first document ("main document") of a new batch.
Document Level
The module uses the document level for Patchcode-Controlled Index, for example, to control
document separation.
document separation.
Sequential ID
The scanner assigns a sequential number to the scanned sheets. This number usually cannot be
modified by a rule from the Patchcode-Controlled Index.
modified by a rule from the Patchcode-Controlled Index.
Exception: The sheet is "voided” or "not counted”.
Page 14 of 42