Справочник Пользователя для Brocade Communications Systems DCX 8510-4
Brocade DCX 8510-4 Backbone Hardware Reference Manual
59
53-1002177-05
Chapter
5
Removal and Replacement Procedures
In this chapter
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Introduction
NOTE
Read the safety notices before servicing (
The field-replaceable units (FRUs) in the Brocade DCX 8510-4 can be removed and replaced
without special tools. The Brocade DCX 8510-4 can continue operating during many of the FRU
replacements if the conditions specified in the procedures are followed.
without special tools. The Brocade DCX 8510-4 can continue operating during many of the FRU
replacements if the conditions specified in the procedures are followed.
The following sections contain FRU removal and replacement procedures (RRPs).
ESD precautions
The Brocade DCX 8510-4 contains electrostatic discharge (ESD) sensitive FRUs. When working with
any Brocade DCX 8510-4 FRU, use correct ESD procedures.
any Brocade DCX 8510-4 FRU, use correct ESD procedures.
•
Wear a wrist grounding strap connected to chassis ground (if the Brocade DCX 8510-4 is
plugged in) or a bench ground.
plugged in) or a bench ground.
•
Store ESD-sensitive components in antistatic packaging.