Справочник Пользователя для Uniden BC246T
66
Programming/Editing Optional Settings
ID Search
- the scanner stops on any transmission for
unlocked talk group ID's.
Note: You can also change this setting by pressing Scan
while scanning the system.
while scanning the system.
Setting the Base Frequency/Step/Offset
(Motorola UHF/VHF Systems Only)
(Motorola UHF/VHF Systems Only)
program system
E
Select the system
E
Edit Sys Option
E
Edit Band Plan
E
Select Plan
Select a band plan (1, 2, or 3)
E
Input Base Freq
Input the base frequency
E
Select Step
(5 kHz, 12.5 kHz, 25.0 kHz, 37.5 kHz, 50.0
kHz, 62,5 kHz, 75.0 kHz, 87.5 Khz,
or 100.0 kHz)
E
Offset (380
-759)
Input the offset
E
This setting lets you enter the base frequency, step, and
offset for the band plan you select. This information lets
you set the scanner so it will scan a Motorola UHF/VHF system.
offset for the band plan you select. This information lets
you set the scanner so it will scan a Motorola UHF/VHF system.
Setting Data Skip
(Conventional Systems Only)
(Conventional Systems Only)
program system
E
Select the system
E
Edit Sys Option
E
Set DATA SKIP
E
This setting controls how the scanner behaves when it
stops on a channel that has a data signal.
stops on a channel that has a data signal.
On
- the scanner stops briefly on the channel, but then
immediately resumes scanning automatically. Press E to
select.
select.
Off
- the scanner remains on the channel until the
transmission stops. Press E to select.
Menu
Menu
BC246T Paper OM 062405.fm Page 66 Tuesday, June 28, 2005 10:12 AM