Справочник Пользователя для Ricoh Type 480
Sending Scan Files by Scan to Folder
34
3
Sending Scan Files by Scan to Folder
Procedure for Sending by
Scan to Folder
Scan to Folder
A scan file is sent after scan settings
and destinations are specified.
and destinations are specified.
AAAA
Press the
{{{{Scanner}}}} key.
Note
❒ The illustration is an example.
The actual appearance may be
different.
different.
BBBB
Make sure that no previous set-
tings remain.
tings remain.
Note
❒ If a previous setting remains,
press the
{{{{Clear Modes}}}} key.
CCCC
Make settings for the original, such
as orientation and output tray.
as orientation and output tray.
DDDD
Make the scan settings.
Reference
There are two ways to specify
scan settings, as described be-
low:
• Configure each setting for
There are two ways to specify
scan settings, as described be-
low:
• Configure each setting for
scanning. For details, see
p.73 “Specifying Scan Set-
tings”.
p.73 “Specifying Scan Set-
tings”.
• Recall registered settings. For
details, see p.80 “Programs”.
EEEE
If the network delivery scanner
screen appears, switch to the Scan
to Folder screen.
A Press [ ].
B Press [Switch Destination List].
screen appears, switch to the Scan
to Folder screen.
A Press [ ].
B Press [Switch Destination List].
C Press [E-mail].
D Press [Exit].
The e-mail screen appears.
E Press [ ].
The Scan to Folder screen ap-
pears.
pears.
FFFF
Specify the destination folder.
You can specify the destination
folder in the following ways:
• Select it from the destination list.
• Specify its registration number.
You can specify the destination
folder in the following ways:
• Select it from the destination list.
• Specify its registration number.
ZZZ606S