Инструкция для Sony SFM1

SFM1 

 

 

 

Installation Manual  

Page 9 

1. 

The Griplates™ have M4, M5, M6 and M8 hole patterns to fit the hardware that the flat panel requires. 

Examples:  If your display uses M8 x 20 Phillips head screws. Use the M8 mounting points (Figure 7). 

 

Figure 7. Griplates™ Orientation 

2. 

Once the mounting brackets are aligned, secure the Griplate™ to the flat panel. 

NOTE: 

The dimples of the top plates have to be facing up and the bottom dimples must be facing down. 
Use (1) Griplate™ per mounting point (Figure 8). 

: 

Leave a ¾” gap on both mounting brackets as shown on this diagram. 

CAUTION: 

Do not over tighten the mounting hardware. 

  DIMPLES

FACING UP

3/4"

 DIMPLES

FACING UP

    DIMPLES

FACING DOWN

    DIMPLES

FACING DOWN

 

Figure 8. Griplate™ Attachment 

Dimples 

M8 

M6 

M5 

M4 

Phillips Screw Driver 

Bottom Flat Panel