Справочник Пользователя для Lucent Technologies 555-232-102
Issue 5 June 1999
2-1
Switch Administration
Introduction
This chapter provides the steps necessary to administer the DEFINITY
ECS
Release 5 Generic 3 for system operation.
DEFINITY ECS administration is done via Generic 3 switch commands and the
Mobility Manager administration software. The Mobility Manager software
comprises fields and commands specific to the system operation.
Mobility Manager administration software. The Mobility Manager software
comprises fields and commands specific to the system operation.
Procedure: Software Installation
The following procedure explains how to install the DWBS software. Additional
commands are available to change or delete information. See Chapter 5 for a list
of DEFINITY ECS and Mobility Manager commands associated with DWBS
installation.
commands are available to change or delete information. See Chapter 5 for a list
of DEFINITY ECS and Mobility Manager commands associated with DWBS
installation.
1. (This step can be completed only with the permission of the regional
Customer Service Associate [CSA] either remotely or on-site.) From the
DEFINITY ECS management terminal (MT), log on as init and execute the
change system-parameters customer-options command. Verify that the
G3 Version field on page 1 of the Optional Features form contains V5 or
greater. The system will not operate on an earlier version. Page 1 of the
form appears as follows:
DEFINITY ECS management terminal (MT), log on as init and execute the
change system-parameters customer-options command. Verify that the
G3 Version field on page 1 of the Optional Features form contains V5 or
greater. The system will not operate on an earlier version. Page 1 of the
form appears as follows: