Справочник Пользователя для Nikon D5300

69

Press 

4 or 2 to highlight number of 

intervals (i.e., the number of times the 
camera shoots); press 

1 or 3 to change. 

Press 

2 to continue.

Highlight On and press 

J (to return to the 

shooting menu without starting the interval 
timer, highlight Off and press 

J). The first 

series of shots will be taken at the specified 
starting time, or after about 3 s if Now was selected for Choose start time in 
Step 2. Shooting will continue at the selected interval until all shots have been 
taken; while shooting is in progress, the memory card access lamp will flash at 
regular intervals. Note that because shutter speed and the time needed to 
record the image to the memory card may vary from shot to shot, intervals may 
be skipped if the camera is still in the process of recording the previous interval. 
If shooting can not proceed at current settings (for example, if a shutter speed 
of  “Bulb”  or “Time” is currently selected in shooting mode M or the start time is 
in less than a minute), a warning will be displayed in the monitor.

A

To prevent light entering via the viewfinder interfering with exposure, remove the rubber 
eyecup and cover the viewfinder with the supplied eyepiece cap (

A

Settings can not be adjusted during interval timer photography. Regardless of the release 
mode selected, the camera takes one photograph at each interval; in mode 

J, camera noise 

will be reduced. Bracketing (

0 108), multiple exposure (0 98), and high dynamic range 

(HDR; 

0 96) can not be used.

A

To interrupt interval timer shooting, turn the camera off or rotate the mode dial to a new 
setting. Returning the monitor to the storage position does not interrupt interval timer 
shooting.