Справочник Пользователя для Nikon COOLPIXP7100

For Your Safety

Introd

uc
tion

The battery may leak, overheat, or 
explode if improperly handled. 
Observe the following precautions 
when handling the battery for use in 
this product:
• Before replacing the battery, turn the 

product off. If you are using the 
Battery Charger/AC adapter, be sure 
it is unplugged.

• Use only a Rechargeable Li-ion 

Battery EN-EL14 (included). Charge 
the battery by inserting it in a Battery 
Charger MH-24 (included). For 
Remote Control ML-L3 (available 
separately), use only 3 V CR2025 
lithium battery.

• When inserting the battery, do not 

attempt to insert it upside down or 
backwards.

• Do not short or disassemble the 

battery or attempt to remove or 
break the battery insulation or casing.

• Do not expose the battery to flame 

or to excessive heat.

• Do not immerse in or expose to water.
• Replace the terminal cover when 

transporting the battery. Do not 
transport or store with metal objects 
such as necklaces or hairpins.

• The battery is prone to leakage when 

fully discharged. To avoid damage to 
the product, be sure to remove the 
battery when no charge remains.

• Discontinue use immediately should 

you notice any change in the battery, 
such as discoloration or deformation.

• If liquid from the damaged battery 

comes in contact with clothing or 
skin, rinse immediately with plenty 
of water.

• If leaked battery fluid gets into your 

eyes, rinse them out immediately 
with clean running water and get 
medical treatment.

• Do not attempt to charge batteries 

that are not rechargeable.

• Keep dry. Failure to observe this 

precaution could result in fire or 
electric shock.

• Dust on or near the metal parts of 

the plug should be removed with a 
dry cloth. Continued use could result 
in fire.

• Do not handle the plug or go near 

the Battery Charger during lightning 
storms. Failure to observe this 
precaution could result in electric 
shock.

• Do not damage, modify, forcibly tug 

or bend the USB cable, place it under 
heavy objects, or expose it to heat or 
flames. Should the insulation be 
damaged and the wires become 
exposed, take it to a Nikon-
authorized service representative for 
inspection. Failure to observe these 
precautions could result in fire or 
electric shock.