Справочник Пользователя для NEC 5800/180Ra-7
2-18 Setting Up the System
Powering On the Server System
Power on your system as follows.
1. Make sure all external devices, such as a video display, keyboard, and
mouse have been connected, and the power cords are connected.
2. Power on the video display and any other external devices.
Note:
If the server power cord is connected to a power
control unit such as an UPS (Uninterruptive Power Supply)
make sure that the power control unit is powered on.
make sure that the power control unit is powered on.
3. Press the push-button power on/off switch on the front panel (see
Figure 2-13). Verify that the server power-on LED is lit.
Note:
The server management logic on your system
board monitors and logs system voltage changes. When
powering up or down your system you may experience a
1–5 second delay from the time you press the push-button
power on/off switch on the front panel and your system
powering up or down. This is normal system operation and is
required by the server management logic.
powering up or down your system you may experience a
1–5 second delay from the time you press the push-button
power on/off switch on the front panel and your system
powering up or down. This is normal system operation and is
required by the server management logic.
B
A
A
Power on/off switch
B
Power-on LED
Figure 2-13. Power On/OFF Switch and Power-On Indicator