Справочник Пользователя для Polycom 7.5
1-1
1
Before You Begin
The MGC Manager application is designed to set up and monitor multipoint
video conferences, and to perform system configuration activities for the
MGC Multipoint Control Units (MCUs) to which it connects. MGC
Manager is consists of a user-provided PC workstation, equipped with a
video conferences, and to perform system configuration activities for the
MGC Multipoint Control Units (MCUs) to which it connects. MGC
Manager is consists of a user-provided PC workstation, equipped with a
Windows 98
®
, Windows NT
®
, Windows 2000
®
or Windows XP
®
operating
system, and of the MGC Manager software. The PC can connect to the
MGC unit via LAN, Internet, dial-up modem or RS-232 interface.
MGC unit via LAN, Internet, dial-up modem or RS-232 interface.
System Requirements
The MGC Manager application can be installed in an environment that
meets the following requirements:
meets the following requirements:
•
IBM PC compatible computer Pentium II, 400 MHz CPU or higher
•
Minimum 64 MB RAM (recommended 64 MB)
•
Windows 98
®
, Windows ME
®
, Windows NT
®
, Windows 2000
®
or
Windows XP
®
operating system
•
Modem (optional)
•
Network capabilities - TCP/IP
Prerequisites
This manual assumes the user has the following knowledge:
•
Familiarity with Windows 98
®
, Windows NT
®
, Windows 2000
®
, or
Windows XP operating systems and interface
•
Basic knowledge of video conferencing concepts and terminology