Справочник Пользователя для Polycom 1725-22886-001/A
Connect the Standard Equipment
5
Connect the Standard Equipment
Connect the PowerCam Plus to the Polycom Instructor RP.
1.
Place the PowerCam Plus on the video
conferencing shelf.
2.
Connect one end of the PowerCam Plus
cable to the VSX 8000 system as described in
the Polycom Setting Up the VSX 8000 System
document. The VSX 8000 system is located
above the annotation box in the Polycom
Instructor RP cabinet.
3.
Connect the other end of the PowerCam Plus
cable to the PowerCam Plus as described in
the Polycom Setting Up the PowerCam Plus
document.
Connect the Polycom microphone to the Polycom Instructor RP.
1.
Place the microphone on a table or other flat
surface.
The microphone performs best if you place it
The microphone performs best if you place it
correctly. For information about microphone
placement, refer to the Polycom
Administrator’s Guide for the VSX Series.
2.
Find the microphone cable in the back of the
Polycom Instructor RP system. One end of
the cable is already connected to the system.
Connect the other end to the microphone.
You can connect up to three daisy-chained
Polycom microphones to the system. If you
choose to connect more than one microphone,
you will need to order the appropriate cables. To
obtain the lengths and part numbers for these
cables, refer to the Polycom Administrator’s Guide
for the VSX Series.
1
Note
Do not power on the PowerCam Plus or
any of the standard equipment until you
are ready to power on the complete
system as described in Power on the
System on page 10.
any of the standard equipment until you
are ready to power on the complete
system as described in Power on the
System on page 10.
2