Справочник Пользователя для Pelco C1902M (11/96)
16
Pelco Manual C1902M (11/96)
7.2 CARE OF THE UNIT
•
Remove dust or dirt on the surface of the lens or
CCD with a blower.
CCD with a blower.
•
Use a soft, dry cloth to clean the body. If it is very
dirty, use a cloth dampened with a small quantity
of a neutral detergent, then wipe dry.
dirty, use a cloth dampened with a small quantity
of a neutral detergent, then wipe dry.
•
Avoid using volatile solvents such as thinner, al-
cohol, benzene and insecticides. They may dam-
age the surface finish and/or otherwise impair the
operation of the camera.
cohol, benzene and insecticides. They may dam-
age the surface finish and/or otherwise impair the
operation of the camera.
CAUTION: The camera should
not be pointed at the sun, or used
for shooting very bright objects, as
the CCD imager may be perma-
nently damaged
not be pointed at the sun, or used
for shooting very bright objects, as
the CCD imager may be perma-
nently damaged
8.0 MAINTENANCE
These color cameras, as shipped, are factory adjusted
and tested for optimum performance in most applica-
tions. No additional camera setup procedures should
normally be required. However, improved performance
may be obtained in some applications by field setup.
Setup should be limited to the procedures described
herein.
and tested for optimum performance in most applica-
tions. No additional camera setup procedures should
normally be required. However, improved performance
may be obtained in some applications by field setup.
Setup should be limited to the procedures described
herein.