Справочник Пользователя для TANDBERG 5000
16
VISION 5000 Videoconferencing System
Installation
Power on monitor
Power on the monitor and use the monitor remote control to select the Audio/Video input used (refer to your
monitor manual). Remember to select S-video (S-VHS) input to avoid a black and white picture.
Example 29 monitor (not USA)
For the JVC av-29TS2/ BD3 29 monitor select the External input for Scart 1 and then select an S-VHS (S-
Video) signal. Do this by pushing the 0/AV button on the monitor remote control until the E1 message is
displayed. To select S-VIDEO input please do the following (using the monitor remote control):
Press OK. The MENU appears.
Press
s/t
to select EXT SOURCE, then press OK. The EXT SOURCE menu appears.
Press
s/t
to select EXT SETTING, then press OK. The EXT SETTING menu appears.
Press
s/t
to select an EXT input terminal.
Press yellow button. The S-VIDEO input indication appears.
Toggle between Composite Video and S-VIDEO with the yellow button.
Press OK to exit menu.
Example 33 monitor (not USA)
For the Grundig M84 33 monitor you have to select the External input for Scart 1 and then select S-VHS(S-
Video) signal. Do this by pushing the 0/AV button on the remote control until the AV 1 message is displayed
on the monitor. To select S-VIDEO input please do the following:
Press i and OK. The DIALOG CENTER appears.
Press
p+
s/t
p-
to select AUDIO/VIDEO INPUTS, then press OK.
The AUDIO/VIDEO INPUTS menu appears.
Select Video recorder using the
p+
s/t
p-
keys.
Press the
-
+
buttons until the SVHS input indication appears.
Press the TXT button to exit from the menu.
You only need to set this once as the monitor will remember its setting even if powered off.
You only need to set this once as the monitor will remember its setting even if powered off.