Справочник Пользователя для SMART Technologies 880ix3 AND 885ix3
APPENDIX A
REMOTELY MANAGING THE SYSTEM THROUGH A NETWORK INTERFACE
REMOTELY MANAGING THE SYSTEM THROUGH A NETWORK INTERFACE
61
smarttech.com/kb/170911
Submenu setting
Description
Video Mute
Turns the video mute setting on or off. Select On to hide the display
and Off to show it again.
and Off to show it again.
High Speed Fan
Adjusts the speed of the projector’s fan. Select High or Normal.
NOTE
Use the High setting when the projector’s temperature is high or
the altitude is above 6000' (1800 m).
the altitude is above 6000' (1800 m).
Projector Mode
Adjusts the projection mode to Front, Ceiling, Rear or Rear Ceiling.
IMPORTANT
SMART recommends that you never change this setting from the
Ceiling projection mode.
Ceiling projection mode.
Source
Adjusts the input source to VGA1, HDMI1, HDMI2, or Composite.
HDMI1
Assigns an alternative name (up to 15 characters long) to the HDMI1
input, which appears when you select the HDMI1 input.
input, which appears when you select the HDMI1 input.
HDMI2
Assigns an alternative name (up to 15 characters long) to the HDMI2
input, which appears when you select the HDMI2 input.
input, which appears when you select the HDMI2 input.
VGA1
Assigns an alternative name (up to 15 characters long) to the VGA1
input, which appears when you select the VGA1 input.
input, which appears when you select the VGA1 input.
Composite
Assigns an alternative name (up to 15 characters long) to the
Composite video input, which appears when you select the
Composite video input.
Composite video input, which appears when you select the
Composite video input.
Emergency Alert
Turns the on-screen alert broadcast message on or off. When
enabled, this message displays over the current projected image.
enabled, this message displays over the current projected image.
Alarm Message
Displays an on-screen emergency notification message (maximum
60 characters).
60 characters).
Control panel II
This menu allows you to associate a video source with a USB receptacle on the ECP or pen tray.
Submenu setting
Description
USB1 Source
Enables touch for the selected video source (VGA, HDMI1, HDMI2
or None) by associating the video source with the room computer
USB receptacle (USB1) on the ECP or pen tray.
or None) by associating the video source with the room computer
USB receptacle (USB1) on the ECP or pen tray.
USB2 Source
Enables touch for the selected video source (VGA, HDMI1, HDMI2
or None) by associating the video source with the laptop USB
receptacle (USB2) on the ECP or pen tray.
or None) by associating the video source with the laptop USB
receptacle (USB2) on the ECP or pen tray.