Справочник Пользователя для SMART Technologies 880ix3 AND 885ix3
APPENDIX B
REMOTELY MANAGING THE SYSTEM THROUGH AN RS-232 SERIAL INTERFACE
REMOTELY MANAGING THE SYSTEM THROUGH AN RS-232 SERIAL INTERFACE
71
smarttech.com/kb/170911
Field definitions
Field
Possible values
Description
current input
l
VGA1
l
Composite
l
HDMI1
l
HDMI2
l
None
A text list of available video source inputs.
None is a non-selectable input and is returned
in response to a “get input” command when the
projector is turned off.
None is a non-selectable input and is returned
in response to a “get input” command when the
projector is turned off.
target input
l
= VGA1
l
= Composite
l
= HDMI1
l
= HDMI2
l
= None
l
= Next
A text list of possible inputs. Selecting Next
causes the projector to move to the next item
in the list and return a response equivalent to a
user-specified input.
causes the projector to move to the next item
in the list and return a response equivalent to a
user-specified input.
current videoinputs
VGA1, Composite,
HDMI1, HDMI2
HDMI1, HDMI2
A comma-separated list of available projector
inputs. The strings returned in this command
must match the strings used for the input
selection from the on-screen display (OSD).
inputs. The strings returned in this command
must match the strings used for the input
selection from the on-screen display (OSD).
current usb1source
l
VGA1
l
HDMI1
l
HDMI2
l
Disabled
Current value for which the USB1 switch is
enabled
enabled
target usb1source
l
= VGA1
l
= HDMI1
l
= HDMI2
l
= Disabled
Value to which the USB1 switch-enabled source
is set. If this value is the same as the USB2
source, the USB1 source is used and the USB2
source is ignored.
is set. If this value is the same as the USB2
source, the USB1 source is used and the USB2
source is ignored.
current usb2source
l
VGA1
l
HDMI1
l
HDMI2
l
Disabled
Current value of the USB2 switch
target usb2source
l
= VGA1
l
= HDMI1
l
= HDMI2
l
= Disabled
Value to which the USB2 switch-enabled
source is set. If this value is the same as the
USB2 source, the USB1 source is used and the
USB2 source is ignored.
source is set. If this value is the same as the
USB2 source, the USB1 source is used and the
USB2 source is ignored.