Справочник Пользователя для SMART Technologies D600i4

 

CHAPTER 6 –  MAINTAINING YOUR INTERACTIVE WHITEBOARD SYSTEM

8. Confirm that the projector is operating and that the lamp module is correctly 

installed by pressing the Power 

 button once on the remote control or ECP, 

and then waiting for the projector to turn on completely.

The ECP’s power light turns solid green when the system starts.

9. Wait five minutes for the projector to warm up.

NOTE
You may need to adjust the projected image after performing the previous 
procedures. For more information, see the included 

 and the tips on 

Transporting Your Interactive Whiteboard 
System

Save your original SMART Board 600i4 or D600i4 interactive whiteboard system 
packaging so that it’s available if you need to transport your interactive whiteboard 
system. When required, repack it with as much of the original packaging as possible. 
This packaging was designed with optimal shock and vibration protection. If your 
original packaging is no longer available, purchase the same packaging directly from 
your 

If you prefer to use your own packaging materials, make sure you adequately protect 
your unit. Ship your interactive whiteboard in an upright position to deter shippers from 
placing heavy objects on it.

Contacting SMART Technical Support

See Appendix B:Customer Support on page 101 for technical support contact 
information.

Before contacting SMART Technical Support, make note of the projector’s serial 
number, and then write it down on the inside cover of this manual (if you printed it).