Справочник Пользователя для SMART Technologies D600i4

CHAPTER 5 – TROUBLESHOOTING YOUR INTERACTIVE WHITEBOARD 
SYSTEM

 

System Status and Warning Lights 

This section describes your SMART Board 600i4 or D600i4 interactive whiteboard 
system’s three status and warning light regions and their patterns. Refer to these 
tables to troubleshoot your interactive whiteboard, ECP or projector. If you’re unable 
to restore the system to a normal operating state, record the behavior of the lights, 
and then call your 

ECP Power Button Status LED

The ECP’s main power button also functions as a status LED. 

Interactive Whiteboard Indicators and 
Controls

Your SMART Board 600 or D600 series interactive whiteboard includes the following 
indicators and controls:

•

An LED Ready light

•

Pen tray buttons, LEDs and sensors

•

The controller module’s reset button

For more information about your interactive whiteboard’s indicators and controls, 
and to resolve common issues, see the 

Off

The projector system isn’t receiving power. Confirm that the 
projector is on, and that the power cable is connected. 
Confirm that your power supply is on and active. At the projector, 
check your power cable and the ECP’s 4-pin powered-mini-DIN 
connection. At the ECP, check the DB15 connector. If nothing 
changes after you check your connectors and power supply, call 
your 

Solid amber

The projector is receiving power but is turned off. 

Flashing green The projector is receiving power and is turning on. 

Solid green

The projector is on, and the ECP is receiving power and is 
communicating with the projector. 

Flashing 
amber

Your interactive whiteboard system is about to turn off.