Справочник Пользователя для SMART Technologies D600i4

 

CHAPTER 5 – TROUBLESHOOTING YOUR INTERACTIVE WHITEBOARD 
SYSTEM

Projector Error States

System administrators can solve or troubleshoot the following projector error states on 
their own prior to contacting technical support. Performing an initial troubleshooting on 
your projector will reduce the time of a support call.

Your Projector Doesn’t Respond to Commands

If your projector doesn’t respond to commands or if it starts to display code after you 
entered a command, perform the following procedure:

1. Turn off the projector, and then wait 15 minutes for it to cool down.

2. Disconnect the power cord from the power outlet. Wait a minimum of 60 seconds.

3. Reconnect the power cord.

4. Restart the projector.

Off

Solid red

The projector has a fan issue. The projector might 
shut down automatically. See The “Fan Failure” 
Message Appears on page 68 to troubleshoot the 
projector.

Off

Solid red

The projector has a color wheel issue. See
The “Color Wheel Failure” Message Appears on 
page 69 to troubleshoot the projector.

Solid amber

Flashing red

The projector has a lamp issue. See The “Lamp 
Failure” Message Appears on page 69 to 
troubleshoot the projector.

Off

Off

The projector isn’t receiving power. See The Ready 
Light Isn’t Lit on page 70 to troubleshoot the 
projector.