Справочник Пользователя для SMART Technologies D600i4

CHAPTER 5 – TROUBLESHOOTING YOUR INTERACTIVE WHITEBOARD 
SYSTEM

 

Accessing the Service Menu

CAUTION
•

To prevent tampering or unintentional changes, only system administrators 
should access the service menu. Do not share the service menu access code 
with casual users of your interactive whiteboard system.

•

Do not adjust any settings in the service menu other than those listed in the 
following procedures. Changing other settings might damage or affect the 
operation of your projector and invalidates your warranty.

Retrieving Your Password

If you forget the projector’s password, you can retrieve it by accessing the projector 
service menu directly from the projector or from the web page’s password settings 
menu (see page 62).

1. Using the remote control, press the following buttons quickly to access the service 

menu: Down, Up, Up, Left and Up.

2. Scroll to the Password Get field, and then press Enter on the remote control.

The password appears on the screen. 

3. Record the password.

4. Scroll to the Exit field, and then press Enter on the remote control to exit the 

projector service menu.

Resetting the Projector

At some point during troubleshooting, you may need to reset all projector settings.

IMPORTANT
This option is irreversible.

1. Using the remote control, press the following buttons quickly to access the service 

menu: Down, Up, Up, Left and Up.

2. Scroll to the Factory Reset field, and then press Enter.

3. Scroll to the Exit field, and then press Enter to exit the projector service menu.