Справочник Пользователя для Beko GNE 60520 DX

Скачать
Страница из 35
EN
7
3
  Installation 
C  Please remember that the 
manufacturer shall not be held liable if 
the information given in the instruction 
manual is not observed.
Points to be considered 
when re-transporting your 
refrigerator
1.  Your refrigerator must be 
emptied and cleaned prior to any 
transportation.
2.  Shelves, accessories, crisper and etc. 
in your refrigerator must be fastened 
securely by adhesive tape against any 
jolt before repackaging.
3.  Packaging must be tied with thick 
tapes and strong ropes and the 
rules of transportation printed on the 
package must be followed.
C Always remember...
Every recycled material is an 
indispensable source for the nature 
and for our national resources.
If you wish to contribute to recycling 
the packaging materials, you can 
get further information from the 
environmental bodies or local 
authorities.
Before operating your 
refrigerator
Before starting to use your refrigerator 
check the following:
1.  Is the interior of the refrigerator dry 
and can the air circulate freely in the 
rear of it?
2.  You can install the 2 plastic wedges 
as illustrated in the figure. Plastic 
wedges will provide the required 
distance between your refrigerator 
and the wall in order to allow the air 
circulation. (The illustrated figure is 
only an example and does not match 
exactly with your product.)
3.  Clean the interior of the refrigerator as 
recommended in the “Maintenance 
and cleaning” section.
4.  Plug the refrigerator into the wall 
outlet. When the door is open the 
respective interior light will come on.
5.  You will hear a noise as the 
compressor starts up. The liquid and 
gases sealed within the refrigeration 
system may also give rise to noise, 
even if the compressor is not running 
and this is quite normal. 
6.  Front edges of the refrigerator may 
feel warm. This is normal. These 
areas are designed to be warm to 
avoid condensation.