Справочник Пользователя для Tandberg Data T40

 

StorageLibrary Installation and User Guide 

15 

Figure 8. Mounting the Rack mounting Kit to a Rack  

Figure 9. StorageLibrary Mounted in a Rack

 shows the rails mounted in a rack with one screw M6x12 

in upper hole on both left and right side. On the rear side, two screws must be used on both left and 
right side. A total of six screws are used to install the rails to the rack. 

Mounting the StorageLibrary to the Rack 

Make sure that the screws connecting the rails to the rack are tightened properly before installing the 
StorageLibrary in the rack. 

Slide the StorageLibrary on the rails from the front of the rack.  

Fix the StorageLibrary using two M6x12 screws in front of the rack, one on both left and right side. 
The lower screw on each side connects the library to the rack, whereas the upper screw on each side 
connects the left and right rail assemblies to the rack, as shown in 

Figure 9. StorageLibrary Mounted

 

in a Rack

.  

Figure 9. StorageLibrary Mounted in a Rack, Front View 

  

Rear Rack Mount Rail

(Screw M6x12)

Step 3
(Screw M4x12, 
nut and washer)

Step 5
(Screw M6x12)

Front Rack Mount Rail

Holes to be used if rack 

depth is shorter than the 

StorageLibrary T40

Use  these holes if 
rack depth is equal 
or longer than the 
StorageLibrary T40