Справочник Пользователя для Mitsubishi Electronics JT-SB216JSH-S-E
− 5 −
Location Clearance
Top
Open
Left
150mm
Right
150mm
Front
Open
Below
130mm
Installation conditions
■ Required space for installation
Cautions
Be sure to secure at least the distances
listed in the right-hand table from walls,
flammable (combustible) materials and
so on.
flammable (combustible) materials and
so on.
Ensure a distance of at least 130mm from
the floor. Failure to do so may result in dirt
or water entering the appliance, causing
damage.
or water entering the appliance, causing
damage.
Ensure there is at least 150mm on
both sides of the appliance to allow for
maintenance.
maintenance.
■ Suitable walls
Flat walls with no unevenness.
Walls that can support the weight of the appliance.
Reinforce any walls made with materials other than
Walls that can support the weight of the appliance.
Reinforce any walls made with materials other than
concrete.
When installing on a concrete wall, use commercially
available metal screw anchors.
■ Making the appliance easier to use
Refer to the "Installation position guide".
Leave at least 200mm clearance on the left to make
Leave at least 200mm clearance on the left to make
maintenance easier.
Avoid locations where people or doors might bump
into the appliance.
Installation position guide
Wall
Right
Left
150
150
130
Below
Unit (mm)
For men: 925mm
For women: 905mm
For women: 905mm