Справочник Пользователя для Southbend sb1018

For Machines Mfg. Since 8/09

Model SB1018

-17-

13.  Pivot the motor assembly upward, then place 

the belt over the gearbox and motor pulleys, 

as shown in Figure 17.

14.  Install the pulley cover (Figure 18) with two 

M6-1 x 12 hex bolts, three 6mm flat washers, 

and the South Bend cast aluminum knob 

(see Figure 19).

15.  Slide the vise handwheel onto the leadscrew 

and tighten the set screw shown in Figure 

20. Thread the handle into the handwheel 

and tighten it.