Справочник Пользователя для Intel SERVER CHASSIS SR2500 SR2500

Intel® Server System SR2500AL Product 

The I/O connector locations on the back of the chassis are pre-cut, so the use of an I/O shield is 
not required. The supplied EMI gasket must be installed to maintain Electromagnetic 
Interference (EMI) compliance levels.   

TP02095

A

B

P

O

N

M

K

J

I

D

G

H

E

F

C

L

A. 

Low Profile PCIe* Add-in Card Slots 

I. 

USB 6 

B. 

Full Height PCI Add-in Card Slots 

J. 

USB 5 

C. 

Upper Power Supply Module  

K. 

Video 

D. 

Upper Power Receptacle 

L. 

DB-9 Serial A Connector  

E. 

Lower Power Receptacle 

M. 

NIC 2 

F. 

Lower Power supply Module 

N. 

NIC 1 

G. Intel

®

 Remote Management Module NIC (Optional) 

O. 

RJ45 Serial B Connector 

H. Intel

®

 I/O Expansion Module (Optional) 

P. 

PS2* Keyboard and Mouse 
Connectors 

 

The complete system includes the use of several system boards which are used as internal 
interconnects and provide feature accessibility. The following provides a brief description for 
each. 

•  Bridge Board – PCB used to route signals from the server board to the mid-plane and 

control panel boards. 

•  Mid-plane – A PCB used to determine the desired hard drive interface for the system. 

Two mid-plane options are available for this system: 

o

  Active SAS/SAS RAID – cable less solution with onboard SAS controller 

o

  Passive SATA – cabled to SATA ports on the server board or from add-in 

adapter. 

•  Backplane – Hot swap backplane capable of supporting both SATA and SAS hard 

drives. 

•  Riser Cards – PCI riser cards used to provide up to five add-in card slots to the system. 

Available riser card options for this system include: 

o

  Low profile, two slot PCI Express*  

o

  Full height, three slot PCI-X* (passive) 

o

  Full height, three slot PCI-X (active) with onboard PXH PCI bridge chip 

o

  Full height, two PCI Express slots + one PCI-X slot