Справочник Пользователя для Intel SERVER CHASSIS SR2500 SR2500
Модели
SR2500
Intel® Server System SR2500AL
Peripheral and Hard Drive Sub-System
Revision – 1.00
Intel order number D31980-004
55
The activity LED functionality is controlled directly by the hard drives. This causes the LED to
function differently between SAS and SATA drives. The expected operation is outlined below.
function differently between SAS and SATA drives. The expected operation is outlined below.
Table 41. Hard Drive Activity LED Functionality
Condition Drive
Type
Behavior
SAS
Ready LED stays on
Power on with no drive
activity
activity
SATA
Ready LED stays off
SAS
Ready LED blinks off when processing a
command
command
Power on with drive activity
SATA
Ready LED blinks on when processing a
command
command
SAS
Ready LED stays off
Power on and drive spun
down
down
SATA
Ready LED stays off
SAS
Ready LED blinks*
Power on and drive spinning
up
up
SATA
Ready LED stays off
5.5.2.3 Optional
6
th
Hard Drive
The backplane is capable of supporting a 6
th
hot-swap SAS/SATA hard drive with the addition of
an optionally installed backplane add-in board. The 6
th
drive add-in board assembly consists of
a PCB with power and interface connectors, and a mounting bracket allowing for the add-in card
to slide into a fitted cut out on the existing backplane.
to slide into a fitted cut out on the existing backplane.