Справочник Пользователя для Graco ti15034a

f.

Place u-bolt on pump door protrusion.

8.

Ratchet pump door forward.

9.

Open pump door.

10. Pull out pump pin and place in pin holder.

1.

Adjust piston rod with pin holder to pull out piston 
rod. Tap piston rod on hard surface to push in piston 
rod.

2.

Push pump collar flush with bearing housing ledge 
to be able to close pump door.

3.

Slide pump into connecting rod. Push pump pin until 
it is fully retained.
NOTE: Pin will snap into position.

ti6375a

ti6377a

ti7327a

ti6325a

ti5492a

ti7328a

ti6378a