Справочник Пользователя для Wagner SprayTech 9145

English

 

14 

 

  5.  Unclip the return tube from the suction tube and place it 

into the waste container.  Turn the PRIME/SPRAY knob 

to PRIME.

  7.  Place the original material container next to the waste 

container.  Aim the spray gun into the side of the 

original material container and hold the trigger.

  9.  When cleaning solution flows from the spray gun, keep 

holding the trigger and aim the spray gun into the side of 

the waste container.

  10.  Trigger the gun until the fluid flowing out of the gun is 

clear.  You may need to empty the waste container and 

continue flushing.

  11.  Turn the PRIME/SPRAY knob to PRIME and trigger gun 

to relieve pressure.

  6.  Turn water supply on.  Turn pump ON (l).  Water will go 

into the suction tube and out through the return tube.  

Let pump run for a few minutes to allow the return tube 

to be flushed. 

  8.  While pulling the trigger, turn the PRIME/SPRAY knob 

to SPRAY to purge material from the hose back into the 

original container.

Containers should

be touching

Hold trigger

Hold trigger