Справочник Пользователя для Wagner SprayTech 110v

 

GENERAL VIEW OF APPLICATION

The main area of application are thick layers of highly viscous 

coating material.

At the Super Finish 23 PLUS unit a diaphragm pump takes in 

the coating materials and transports it via a high-pressure 

hose to the spray gun with the airless tip. Here the coating 

material atomizes since it is pressed through the tip core at 

a maximum pressure of 25 MPa (250 bar, 3625 psi). This high 

pressure has the effect of micro fine atomisation of the coat-

ing material.

As no air is used in this process, it is described as an AIRLESS 

process.

This method of spraying has the advantages of finest atomisa-

tion, cloudless operation (depending of a correct unit adjust-

ment) and a smooth, bubblefree surface. As well as these, the 

advantages of the speed of work and convenience must be 

mentioned.

The following section contains a brief description of the tech-

nical construction for better understanding of the function:

Super Finish 23 PLUS is an electrically driven high-pressure 

paint spraying equipment.

The electric motor (1) drives the hydraulic pump via planetary 

gears (2). A piston (3) is moved up and down so that hydraulic 

oil is moved under the diaphragm (4) which then moves.

In detail:

The downwards movement of the machine opens the disk in-

let valve (5) automatically and coating material is sucked in.

During the upwards movement of the diaphragm, the coating 

material is displaced and the outlet valve opens while the inlet 

valve is closed.

The coating material flows under high pressure through the 

high-pressure hose to the spray gun and is atomized when it 

exists from the tip.

The pressure control valve limits the set pressure in the hy-

draulic oil circuit and thus also the pressure of the coating 

material.

A pressure change when the same tip is used also leads to a 

change in the amount of paint  atomized.

  

1

  

2

  

3

Sufficient filtering is required for fault-free operation. To this 

purpose the unit is equipped with a suction filter (Item 1) and 

an insertion filter in the spray gun (Item 2). Regular inspec-

tion of these filters for damage or soiling is urgently recom-

mended.

A high-pressure filter (Item 3) -available as accessory- is rising 

up the filtering surface and will make the work more comfort-

able.

1

3

5

4

2