Справочник Пользователя для Wagner SprayTech 0558011 0558012 0558013 0558028 0558096 0558097 0558098

 

10 

ProSpray 3.25

Starting operation 

  1.  Depending on the model, swivel or immerse the suction 

tube (Fig. 7, Item 1) or the suction hose and return hose 
(2) into a container with a suitable cleaning agent.

  2.  Turn the pressure control knob counterclockwise (3) to 

minimum pressure.

  3.  Open the relief valve (4), valve position PRIME 
 

  (

k

 circulation).

 4.  Switch the unit (5) ON.

  5.  Wait until the cleaning agent exudes from the return hose.

 6.  Close the relief valve, valve position SPRAY (p

 spray).

  7.  Pull the trigger of the spray gun.
  8.  Spray the cleaning agent from the unit into an open 

collecting container.

  1.  Depending on the model swivel or immerse the suction 

tube (Fig. 7, Item 1) or the suction hose and return hose 
(2) into the coating material container.

  2.  Turn the pressure control knob counterclockwise (3) to 

minimum pressure.

  3.  Open the relief valve (4), valve position PRIME 
 

  (

k

 circulation).

 4.  Switch the unit (5) ON.

  5.  Wait until the coating material exudes from the return 

hose.

 6.  Close the relief valve, valve position SPRAY (p

 spray).

  7.  Trigger the spray gun several times and spray into a 

collecting container until the coating material exits the 
spray gun without interruption.

  8.  Increase the pressure by slowly turning up the pressure 

control knob.

 

  Check the spray pattern and increase the pressure until 

the atomization is correct.

 

  Always turn the pressure control knob to the lowest setting 

with good atomization.

  9.  The unit is ready to spray.

The Digital Electronic Spray Control (DESC) increases the 
functionality of the sprayer.  It is installed directly below the 
pressure control knob on the control panel.  It consists of a 
display and four function keys.  The display shows various menu 

screens that allow the user to customize and monitor sprayer

operation using the function keys.

SET MPa

23.0

ACTUAL MPa

22.5

Display

Function

Keys

The function keys are numbered 1–4.  Each key is labeled with 
an additional function as well.  
#1/Menu Key
Pressing the #1 key scrolls through the available menu screens 
or performs a function described on the active menu screen.

#2/+ Key
Pressing the #2 key performs a function described on the active 
menu screen or increases a value.

#3/- Key
Pressing the #3 key performs a function described on the active 
menu screen or decrease a value.

#4/Select Key
Pressing the #4 key selects the active menu screen or performs 
a function described on the active menu screen.

Several menu screens are available for the user to customize

and monitor sprayer operation.  They include Main Screen, 

Volume Pumped, Job Volume, Unit Serial #, Timers, Job Timers,

Service Time, Security Code, Prime, and Rapid Clean.

SET MPa

23.0

ACTUAL MPa

22.5

The Main Screen is the default screen 
for the control system at sprayer startup.  
Pressing the #2 key switches between PSI and MPa units of 
measure.  Press the #1 key to scroll through the remaining menu 
screens.

Uncontrolled Copy