Справочник Пользователя для Hitachi NR 83AA4

12

(2)  Adjust the air pressure to 70 psi (4.9 bar  5 kgf/cm

2

).

 

Connect the air hose.

(3)  REMOVE ALL NAILS FROM NAILER.

 

DO NOT push or rest Push Lever against any surface 

or Switching device will not turn.

  DO NOT FORCE OR USE TOOLS TO TURN 

SWITCHING DEVICE.

  Move Switching device completely to the leftward 

position (SINGLE SEQUENTIAL ACTUATION 

MECHANISM).

Leftward position

Switching device

□  THE NAILER MUST NOT LEAK AIR.

(4) Remove the fi nger from the trigger and press the 

push lever against the wood.
□  THE NAILER MUST NOT OPERATE.

Do not pull Trigger

Depress Push Lever

(5)  Separate the push lever from the wood.

  Next, point the nailer downward, pull the trigger and 

then wait in that position for 5 seconds or longer.
□  THE NAILER MUST NOT OPERATE.

Pull Trigger

(6)  First pull the Trigger.

 

Next, depress the Push Lever against the wood.
□  THE NAILER MUST NOT OPERATE.

(7)  Without touching the Trigger, depress the Push Lever 

against the wood.

 

Next, pull the Trigger.
□  THE NAILER MUST OPERATE.

Rightward position

Switching device

(8)  REMOVE ALL NAILS FROM NAILER.

 

DO NOT push or rest Push Lever against any surface 

or Switching device will not turn.

  DO NOT FORCE OR USE ANY TOOLS TO TURN 

SWITCHING DEVICE.

  Move Switching device completely to the rightward 

position (CONTACT ACTUATION MECHANISM).

(9)  With the Nailer off  the wood, pull the Trigger.

 

Next, depress the Push Lever against the wood.
□  THE NAILER MUST OPERATE.

(10) Next, depress the Push Lever against the workpiece.

 

Now pull the Trigger.
□  THE NAILER MUST OPERATE.

(11) If no abnormal operation is observed, you may load 

nails in the Nailer.

 

Drive nails into the workpiece that is the same type to 

be used in the actual application.
□  THE NAILER MUST OPERATE PROPERLY.

000Book_NR83AA4_US.indb   12

000Book_NR83AA4_US.indb   12

2013/04/23   15:04:13

2013/04/23   15:04:13