Справочник Пользователя для Hitachi NT 65GS
English
31
MAINTENANCE
NOTE:
The information contained in this Manual is designed to assist you in the safe
maintenance of the Nailer.
Some illustrations in this Manual may show details or attachments that differ
from those on your own Nailer.
MAINTENANCE AND
INSPECTION
INSPECTION
<Nailer>
Read section titled “SAFETY” (pages 5 – 12).
Read section titled “SAFETY” (pages 5 – 12).
DANGER
䢇 Never use and
test in presence
of flammable
liquids or gases.
of flammable
liquids or gases.
䢇 Keep away from
ignition source.
䢇 No smoking.
WARNING
䢇 Remove fuel cell, battery and all nails
from Nailer when:
1) doing maintenance and inspection;
1) doing maintenance and inspection;
and
2) clearing a jam.
1. Inspecting the magazine
1 REMOVE FUEL CELL and BATTERY.
2 Clean the magazine. Remove dust and
1 REMOVE FUEL CELL and BATTERY.
2 Clean the magazine. Remove dust and
wooden chips which may have
accumulated in the magazine. Lubricate
it with Hitachi Gas tool lubricant.
accumulated in the magazine. Lubricate
it with Hitachi Gas tool lubricant.
CAUTION
䢇 Check that the nail feeder slides
smoothly by pulling it with finger.
If not smooth, nails can be driven at an
irregular angle and hurt someone.
If not smooth, nails can be driven at an
irregular angle and hurt someone.
2. Storing
DANGER
䢇 Store Nailer
properly with fuel
cell and battery
removed.
cell and battery
removed.
䢇 The fuel cell is an
a e r o s o l
dispensers with
f l a m m a b l e
contents.
dispensers with
f l a m m a b l e
contents.
䢇 When not in use,
the Nailer, fuel
cell and battery
should be stored
in tool case and in
a dry place.
cell and battery
should be stored
in tool case and in
a dry place.
䢇 Store indoors at
t e m p e r a t u r e
below 120°F
(50°C).
below 120°F
(50°C).
Cloth
120°F MAX
(50°C)
(50°C)
01Eng_NT65GS_US
12/17/08, 18:48
31