Справочник Пользователя для Hitachi NT 65MA4 (S)
14
English
1. Intermittent operation (Trigger fi re):
2. Continuous operation (Push lever fi re):
(1) Intermittent operation (Trigger fi re)
Use the SINGLE SEQUENTIAL
ACTUATION MECHANISM setting.
WARNING
● For intermittent operation, set the
switching device to the upward
position completely. (i.e. Set to
SINGLE SEQUENTIAL ACTUATION
MECHANISM.)
● To avoid double fi ring or accidental
fi ring due to recoil.
1) Set
the
switching
device
to SINGLE SEQUENTIAL
ACTUATION MECHANISM.
2) Pull the trigger rapidly and fi rmly.
1
Set the switching device to the
upward position (to set to SINGLE
SEQUENTIAL ACTUATION
MECHANISM).
(Set the switching device to the
upward position completely as shown
in the diagram. Otherwise, it will
be set to CONTACT ACTUATION
MECHANISM.)
2
Position the nail outlet on the workpiece
with fi nger off the trigger.
3
Depress the push lever fi rmly until it is
completely depressed.
4
Pull the trigger to drive a nail.
5
Remove fi nger from the trigger.
To continue nailing in a separate location,
move the nailer along the wood, repeating
steps 2 - 5 as required.
Switching Device
1
Upward position
Push Lever
Trigger
3
4
WARNING
● A nail will fi re each time the trigger
is depressed as long as the push
lever remains depressed.
(2) Continuous operation (Push lever fi re)
Using CONTACT ACTUATION
MECHANISM
WARNING
● To avoid double fi ring or accidental
fi ring due to recoil.
1) Do not press the nailer against the
wood with excessive force.
2) Separate the nailer from the wood
as it recoils after nailing.
1
Set the switching device to the
downward position (to set to CONTACT
ACTUATION MECHANISM).
(Set the switching device to the
downward position completely as
shown in the diagram. Otherwise, it will
not operate properly.)
2
Pull the trigger with the Nailer off the
workpiece.
3
Depress the push lever against the
workpiece to drive a nail.
4
Move the Nailer along the workpiece
with a bouncing motion.
Each depression of the push lever will
drive a nail.
As soon as the desired number of nails
have been driven, remove fi nger from the
trigger.
000Book_NT65MA4(S)_US.indb 14
000Book_NT65MA4(S)_US.indb 14
2010/11/24 9:04:30
2010/11/24 9:04:30