Справочник Пользователя для Southbend SB1013

-58-

For Machines Mfg. Since 7/09

EVS Toolroom Lathes

Oil Type ...... Mobil Vactra 2 or ISO 68 Equivalent
Oil Amount ...................................................1 Liter
Check/Add Frequency .................................... Daily
Change Frequency ...................................Annually

The sight glass shown in Figure 112 shows the 
oil level in the gearbox. At the maximum level, 
the oil fills approximately 

3

⁄

4

 of the sight glass. 

At the minimum level, the oil only fills 

1

⁄

4

 of the 

sight glass. Check the oil level daily. When the 
oil approaches the minimum level, add enough 
oil to bring it up to the maximum level.

The gearbox oil must be changed after the 
break-in period and then annually (or every six 
months with hard service or extreme working 
conditions). Figure 113 shows fill and drain 
plugs used when changing the gearbox oil.

Oil Type ...... Mobil Vactra 2 or ISO 68 Equivalent
Oil Amount ...................................................1 Liter
Check/Add Frequency .................................... Daily
Change Frequency ...................................Annually

The sight glass shown in Figure 114 shows the 
oil level in the apron. At the maximum level, the 
oil fills approximately 

3

⁄

4

 of the sight glass. At the 

minimum level, the oil only fills 

1

⁄

4

 of the sight 

glass. Check the oil level daily. When the oil 
approaches the minimum level, add enough oil to 
bring it up to the maximum level. This oil is also 
used by the way pump to lubricate the ways and 
slides.

The oil in the apron reservoir must be changed 
after the break-in period and then annually (or 
every six months with hard service or extreme 
working conditions). The drain plug is shown in 
Figure 114 and the fill plug is shown in Figure 
115.