Справочник Пользователя для Echo SRM-3800 TYPE1-E

- 18 -

6. Accelerate to full throttle for 2 - 3 seconds to clear

any excess fuel in the engine, then return to idle.
Accelerate engine to full throttle to check for
smooth transition from idle to high speed. If engine
hesitates turn “L” needle CCW 1/8 turn and repeat
acceleration. Continue adjustment until smooth
acceleration results.

7. Check idle speed and reset if necessary as

described in item 5.

•

Use only the blade designated by the manufacturer
for this model.

•

When crack is noticed on the blade, never use it,
but replace with a new one.

•

Round the teeth bottom for 1- 2 mm radius in order
to avoid the crack using a round file.
-

Rounded part is not to be sharpened.

-

Sharpen each cutter equally so as to retain
the balance of the blade.

-

In sharpening the edge by use of a grinder, do
not cool the cutter abruptly by immersing it in
water.

30

°

Cutter edge

Not sharpened

2R

2mm

Tooth bottom

The unit is incorporated with a CDI (Capactior Discharge
Ignition) system, which does not require adjustment
of ignition timing and the contact breaker point gap.
Ensure wire connections and couplers assembling.