Справочник Пользователя для Ryobi 325HDA55X-series
English
– 13
FUEL HANDLING
Fuel
CAUTION! The machine is equipped with a two-stroke engine
and must always been run using a mixture of petrol and two-
stroke engine oil. It is important to accurately measure the
amount of oil to be mixed to ensure that the correct mixture is
obtained. When mixing small amounts of fuel, even small
inaccuracies can drastically affect the ratio of the mixture.
and must always been run using a mixture of petrol and two-
stroke engine oil. It is important to accurately measure the
amount of oil to be mixed to ensure that the correct mixture is
obtained. When mixing small amounts of fuel, even small
inaccuracies can drastically affect the ratio of the mixture.
Petrol
CAUTION! Always use a good quality petrol/oil mixture (at
least 90 octane). If your machine is equipped with a catalytic
converter (see chapter on Technical data) always use a good
quality unleaded petrol/oil mixture. Leaded petrol will destroy
the catalytic converter and it will no longer serve its purpose.
least 90 octane). If your machine is equipped with a catalytic
converter (see chapter on Technical data) always use a good
quality unleaded petrol/oil mixture. Leaded petrol will destroy
the catalytic converter and it will no longer serve its purpose.
Use low-emission petrol, also known as alkylate petrol, if it is
available.
available.
•
The lowest recommenva79.8(ter (t recommenv)25li.57T*s
en small aca(a)3ol,c reck0t(le)15.1((UTIOir)ualis39.8(n incr09 ed(en small )rok)20(tempe25l/oil mixt, which)10(aresulrolnno lon)25lioustrok)20(e engall )damag-29.8(pose)15-i.57T*s
rol an(v)25.utcata0w[(aousthigharef fue15.thigh5rcommenv)i.57T*s