Справочник Пользователя для Husqvarna 324LD

12 – 

English

•

Clip the loop handle onto the shaft. Note that the loop 
handle must be fitted between the arrows on the shaft.

•

Slide the spacer into the slot in the loop handle.

•

Fit the nut, knob and screw. Do not overtighten.

•

Now adjust the trimmer to give a comfortable working 
position. Tighten the bolt/knob.

•

Make sure the knob is loose.

•

Align the cut-out in the lower part of the shaft with the 
coupling locking tab on the upper part of the shaft. Then 
lock the sections together.

•

Tighten the knob.

•

Undo the knob (at least three turns).

•

Push the knob towards the coupling.

•

Carefully twist the lower half of the shaft to unlock it.

•

Hold both parts of the shaft and pull the lower part of the 
shaft out of the coupling.