Справочник Пользователя для Husqvarna 124C
12
ASSEMBLY
NOTE:
Make sure unit is assembled cor-
rectly as shown in this manual.
Fitting the loop handle
S
Position the handle on the shaft. Note
that the handle must be mounted be-
tween the two arrows on the shaft.
that the handle must be mounted be-
tween the two arrows on the shaft.
S
Fit the screw, securing plate and wing
nut as shown in the diagram.
nut as shown in the diagram.
S
Tighten the wing nut.
F
itting the trimmer guard and
trimmer head
S
Fit the correct trimmer guard (A) for use
with the trimmer head. Hook the trimmer
guard/combination guard onto the fitting on
the shaft and secure with the wing nut (B).
with the trimmer head. Hook the trimmer
guard/combination guard onto the fitting on
the shaft and secure with the wing nut (B).
A
C
B
S
Fit the dust cup (C) on the shaft. The nut
must be completely covered by the dust
cup.
must be completely covered by the dust
cup.
S
Hold the dust cup with a wrench to pre-
vent the shaft from rotating.
vent the shaft from rotating.
S
Screw the trimmer head (D) onto the
shaft.
shaft.
S
To dismantle, follow the instructions in
the reverse order.
the reverse order.
D