Справочник Пользователя для Pelco RK5000PS-5U
10
C1615M-A (9/05)
INSTALLING AN INTERNAL POWER SUPPLY
The double-width internal power supply must be installed into the RK5000PS-5U chassis. To install the internal power supply, follow these steps
and refer to Figure 8.
and refer to Figure 8.
1. Insert the power supply into the rack.
2. Secure the power supply by tightening the two thumbscrews on the front of the chassis.
3. Plug in the power cord.
4. Turn on the power supply.
Figure 8.
Power Supply Installation