Справочник Пользователя для HP (Hewlett-Packard) 8360

Preset Mode User

SYSTEM

This 

 sets the standard starting configuration of the

synthesizer when the (PRESET) key is pressed, as set by the user. You
can define any starting conditions: Set up the synthesizer with the
conditions you want, then select Preset Mode User . Now whenever

you press 

 the synthesizer returns to the configuration

you set. If preset mode user is set, when you press (PRESET), the
synthesizer displays the following:

*** USER DEFINED PRESET RECALLED ***

You can still do a factory preset. When the user preset mode
is active, the 

 Factory Preset appears when you press

(PRESET). An asterisk next to the key label indicates that this feature
is active.

SCPI:SYSTem:PRESet TYPE USER

NONE

 Preset Mode Factory, Save 

User Preset

“Changing the Preset Parameters,” in Chapter 1.

Printer Adrs

SYSTEM

8

This 

 lets the synthesizer recognize a printer address between

0 and 30. The synthesizer can act as a controller for a printer during
self-test, if the log-to-a-printer feature is initiated.

DIAGnostic:INSTrument:PRINTer:ADDRess <num>

NONE

Adrs Menu,